Testing Follow-Me Destinations
This tests if notifications sent to Follow-Me destinations (recipients) are received. It is highly
recommended to test every FM destination.
➢ To test a FM destination:
1. At the keypad, enter your Grand Master code, and then press OK.
2. Scroll to Follow Me and then press OK.
3. Scroll to Test FM and then and press OK.
4. Scroll to select a FM destination to test, and then press OK; FM TEST ACTIVATED
displays and a test message is sent to the selected FM destination.
Performing a Keypad Test
This tests a keypad's indicators.
NOTE: This test is not relevant for the Slim keypad.
➢ To perform a keypad test:
1. At the keypad, enter your Grand Master code, and then press OK.
2. Scroll to Maintenance and then press OK.
3. Scroll to Keypad Test and then press OK; all the keypad's indicators display for a few
seconds.
Performing a Siren Test
This tests a siren's' sounding mechanism.
➢ To perform a siren test:
1. At the keypad, enter your Grand Master code, and then press OK.
2. Scroll to Maintenance and then press OK.
3. Scroll to Siren Test and then select the siren to test.
4. Press OK; the siren sounds.
5. Press Exit to end the siren test.
To Next Page
Loading...
