Risco LightSYS Plus - Voice Announcements; Viewed Indicators; Keypad Indicators; Slim Keypad Indicators

01/2022
Page 87
5IN2933
Voice Announcements
Requested/initiated from keypads, Voice Announcements enable users to hear LightSYS
Plus-supplied voice clips (short voice recordings) that are broadcast through Listen-In &
Speak Units – for announcing system events such as alarms, and as confirmation for user-
initiated commands at the time of arming/disarming only.
NOTE: To utilize voice announcements, specific modules need to be installed –ask your
installer.
Viewed Indicators
Requested/initiated from the keypads and remote controls, the following viewed indicators
are provided for system status, operations and events:
• Texts and messages on keypad displays
• Icon status indicators on keypad displays
• LED status indicators on keypads and 8-button remote controls
For the procedures to view system status, see Obtaining System Information, page 35.
Keypad Indicators
NOTE: For wired keypad display options, see Keypad Display Options, page 34.
Slim Keypad Indicators
LED Indicators
LED Color
State
Status
Blue
Blinking
Keypad is communicating with
the panel
Red
On
System is fully or partially armed
Slow flashing
During an exit delay
Rapid flashing
During an alarm
Green
Blinking
Trouble indication is in the
system while the system is
disarmed
Green/Red
Toggling
Waiting for code to be entered