Arm all partitions at the same time, as either fully-armed or partially-armed.
➢ To arm all partitions:
1. Verify that the areas of the premises to be armed are vacated, and that the system is
ready to be armed (view the READY indicator).
2. If not ready to arm, secure (or bypass) any open zones, see Bypassing Zones (Arming with
Manually-Bypassed Zones), page 56 and also Forced Arming (Arming with Automatically-
Bypassed Zones), page 55.
3. If unable to arm, scroll to view system trouble messages, and resolve accordingly. If
installer-defined, you can arm while overriding all current troubles (see Arming with
System Troubles, page 55).
4. Perform the following arming procedure for ALL partitions as either
fully-armed or partially-armed:
Do this to arm ALL partitions:
❖ Fully-arm-all partitions: Enter code ➢press full arm button ➢If only 1
partition, it is now fully-armed. For all partitions, at the All? prompt
press full arm button.
❖ Partially-arm all partitions: Enter code ➢press partial arm button ➢ If
there is only 1 partition, it's now partially-armed. For all partitions, at
the All? prompt press partial arm button.
❖ Fully or partially arm all partitions with Proximity: Place tag at
keypad ➢ at "All?" prompt press either full arm button or partial arm
button.
NOTE: The number of partitions (32 maximum) that can be armed using a
Proximity tag is installer-configured per user.
❖ Quick mode: Press (full-arm) or (partial-arm).
❖ High security mode: Press (full-arm) or (partial-arm).➢
enter code
❖ Proximity arming: Press (full-arm) or (partial-arm) ➢ place
tag at keypad
NOTE: The number of partitions (32 maximum) that can be armed using a
Proximity tag is installer-configured per user.
To Next Page
Loading...
