The Listen-In & Speak Unit is an audio accessory that provides 2-way “listen-in" and/or
"talk” communication to and from the premises (such as between a system user at the site
and the monitoring station). The Listen-In & Speak Unit is also used to broadcast status in
the form of voice announcements (for system events such as alarms, and as confirmation for
user-initiated commands at the time of arming/disarming only – see Voice Announcements,
page 87). Multiple Listen-In & Speak units can be used in the system.
• For operational usage, see the relevant entries in the Acknowledgement Menu, page 31 and
the Operations Menu, page 32.
Operating Locally by Keypads, Remote
Controls/Keyfobs, and Proximity
Working with Keypads
For a description of keypad buttons used for user operations, see Step 5: Working with
Keypads and User Menus, page 12.
Keypad Display Options
Using the "Multi View" Keypad Display
[For wired keypad models with LCD displays]: The keypad displays each partition
number, with date, and time. If installer-defined, a letter can also display to indicate the
partition’s status, as follows:
To Next Page
Loading...
