4. Scroll to Wi-Fi Scan, and then press OK; from the available networks that appear, scroll
to your Router’s Wi-Fi network and then select the desired network.
5. Press [enter].
Step 11: Training System Users
Typically performed by the Grand Master, all system users must be educated and trained in
the operational and security aspects of the system, including, for example:
• Responsibility to safeguard portable user devices (keyfobs, remote controls) and the
confidentiality of user codes
• All operational procedures – those performed at the premises and remotely (such as
obtaining system status, and usage of iRISCO, Web User Interface, SMS, and remote
telephone operation)
• Policy for responding to actual alarms (for example intrusion or emergency)
• Activating emergency alarms, including Duress Disarming
• Follow-Me notification (and cancellation of FM for false alarms)
• Usage of Listen-In & Speak communication
• Silencing an alarm after a false alarm
• Installer/technician and monitoring station contact information – for example, if an
installer/technician-assisted system reset is required after alarm activation
To Next Page
Loading...
