Roche Diagnostics
B-60
Operator’s Manual · Version 3.4
5 Daily operation Cedex Bio analyzer
Validating sample results
Validating the results The system can be set up to automatically accept results that are not flagged. In
addition, it can be set up to accept results with flags that are marked in an editable
list of flags that should be ignored, which is particularly suitable if the flags are
assessed on the host system anyway.
e
See Result handling on page B-179.
See Editing the acceptable flags list on page B-174.
6
Press .
A screen is displayed for selecting your reaction.
7
Do one of the following:
o Press Repeat to re-perform the test using the same dilution.
e
See Repeating tests on page B-61.
o Press Rerun to re-perform the test using a predefined (different) dilution.
e
See Rerunning tests on page B-62.
o Press Accept to accept the result.
e
See Accepting results on page B-63.
o Press Retransmit to send the result to the host again. Use this function if you
suspect that the result has not been stored properly on the host system, for
example because of a communication problem.
Note that this is only available when Host Server = ON is configured.
To Next Page
Loading...
Need help?
General
