Roche Diagnostics
Operator’s Manual · Version 3.4 B-59
Cedex Bio analyzer 5 Daily operation
Validating sample results
a To validate sample results from the results list
1
Choose Workp lac e > Result Review.
A screen is displayed that lists the results.
If TRL Check is activated, the result might be displayed for example as <0.5, and
the <Test Rng flag is added. This means that the measured value is below the
defined TRL value.
Interpreting flags
e
For detailed information on the flags, see List of flags on page E-28.
Displaying details of a result
2
Select the result.
3
Press to display detailed information on the selected result.
4
Press to close the screen.
The screen with the result list is displayed again.
5
Select a result.
A Order number.
B Status
!: The result has not been accepted yet.
@: The result has not been transmitted yet.
C Test name.
D Results.
E Time when the order was defined.
F This test was performed again:
->-: Repeated.
-v-: Rerun with dilution.
G Press to validate the selected result.
H Press to display certain kinds of results
only (filter).
Figure B-17
o To check when the result was generated press .
o For results, that were not generated on the current day, only their date of genera-
tion is displayed. You can look at the results by pressing .
o To display context information of the fluids used to arrive at this result, press ,
then on the detail screen press .
To Next Page
Loading...
Need help?
General
