Roche Diagnostics
Operator’s Manual · Version 3.4 B-79
Cedex Bio analyzer 5 Daily operation
Performing QC
a To validate the QC results
1
Choose Workp lac e > QC Status.
A screen is displayed that lists the most recent QC results for each test that is
installed on the system
2
Select a result.
A Status
!: The result has not been accepted yet.
I: The result was ignored.
@: The result has not been transmitted yet.
B Test name.
C Control ID.
D Result, if no flag was generated.
Flag with highest priority, if a flag was
generated.
Order status, if the control measurement
has not been performed yet.
Figure B-25
To Next Page
Loading...
