EasyManuals Logo

Rockwell Automation Allen-Bradley AADvance T9110 System Build Manual

Rockwell Automation Allen-Bradley AADvance T9110
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
104 Rockwell Automation Publication ICSTT-RM448M-EN-P - February 2021
Chapter 5 Install the AADvance System
The battery has a design life of 10 years when the processor module is
continually powered; for processor modules that are un-powered, the design
life is up to 6 months.
Procedure
To replace a faulty battery, do the following:
1. Use a small cross head screwdriver to release and remove the battery
cover.
2. Remove the battery by pulling on the blue ribbon.
CAUTION: The battery may explode if mistreated. Do not attempt to
recharge, disassemble or dispose of in a fire.
ATTENTION: La pile peut exploser si elle est maltraitée. Ne tentez pas de
la recharger, désassembler ou de la brûler.
WARNING: Batteries must only be changed in an area known to be non-
hazardous.
AVERTISSEMENT: Les piles ne doivent être remplacées que dans une zone
réputée non dangereuse.

Table of Contents

Other manuals for Rockwell Automation Allen-Bradley AADvance T9110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation Allen-Bradley AADvance T9110 and is the answer not in the manual?

Rockwell Automation Allen-Bradley AADvance T9110 Specifications

General IconGeneral
BrandRockwell Automation
ModelAllen-Bradley AADvance T9110
CategoryController
LanguageEnglish

Related product manuals