20 Rockwell Automation Publication ICSTT-RM448M-EN-P - February 2021
Chapter 2 The AADvance Safety Controller
requirements for compliance to the standards for use in a non-hazardous and
hazardous environments.
The AADvance controller has been investigated and approved by UL for use as
Industrial Control Equipment in hazardous locations, Class I, Division 2,
Groups A, B, C and D in North America.
The AADvance controller has been assessed for ATEX compliance. The UL
Certification No. is DEMKO 11 ATEX 1129711X. The ATEX marking is Ex nA IIC
T4 Gc.
Additionally the AADvance controller is approved under the IECEx
certification scheme. The certificate number is IECEx UL 12.0032X
Installation Requirements
for Non-Hazardous
Environment
Investigation File Number E341697
Products Covered
The products investigated and approved:
Programmable Logic Controller Models:
• T9110 Processor Module
• T9401 Digital Input Module
• T9402 Digital Input Module, 16 Channel
• T9431 Analogue Input Module
• T9432 Analogue Input Module, 16 Channel
• T9451 Digital Output Module
• T9481 Analog Output Module
• T9482 Analogue Output Module, 8 Channel.
Listed Accessories for use with PLCs:
• T9100 Processor Backplane
•T9300 I/O Backplane
• T9801 Digital Input Termination Assembly, Simplex
• T9802 Digital Input Termination Assembly, Dual
• T9803 Digital Input Termination Assembly, TMR
• T9831 Analogue input Termination Assembly, Simplex
• T9832, Analogue Input Termination Assembly, Dual
• T9833 Analogue Input Termination Assembly, TMR
• T9851 Digital Output Termination Assembly, Simplex and
T9852 Digital Output Termination Assembly, Dual
• T9892 Digital Output Termination Assembly, Dual
• T9881 Analogue Output Termination Assembly, Simplex
• T9882 Analogue Output Termination Assembly, Dual.
To Next Page
Loading...
Need help?
General
