EasyManuals Logo

Rockwell Automation Allen-Bradley AADvance T9110 System Build Manual

Rockwell Automation Allen-Bradley AADvance T9110
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28 Rockwell Automation Publication ICSTT-RM448M-EN-P - February 2021
Chapter 2 The AADvance Safety Controller
Product Dimensions
A typical controller arrangement is shown with processor modules installed on
the processor base unit and an I/O base unit mated with the processor base
unit. I/O modules are installed on the base unit and a termination assembly
plugged into the I/O base unit.
Storage and Transport
0 to 3,000 m (0 to 10,000 ft.)
This equipment must not be transported in
unpressurized aircraft flown above 10,000 ft.
Electromagnetic Interference
Tested to the following standards: EN 61326-1:2006,
Class A; EN 61326-3-1:2008, EN 54-4: 1997, A1; EN
61131-2:2007; EN 62061:2005.
Hazardous Location Capability Suitable for Class I Div 2 Groups A, B, C and D
There is no specific protection against liquids.
Table 3 - Environmental Specification
Attributes Value

Table of Contents

Other manuals for Rockwell Automation Allen-Bradley AADvance T9110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rockwell Automation Allen-Bradley AADvance T9110 and is the answer not in the manual?

Rockwell Automation Allen-Bradley AADvance T9110 Specifications

General IconGeneral
BrandRockwell Automation
ModelAllen-Bradley AADvance T9110
CategoryController
LanguageEnglish

Related product manuals