Rockwell Automation Allen-Bradley POINT Guard - 1734-UM013 A-EN-P, February 2009; 1734-UM013 B-EN-P, June 2009

Rockwell Automation Publication 1734-UM013J-EN-P - July 2014 203
History of Changes Appendix G
1734-UM013B-EN-P,
June 2009
1734-UM013A-EN-P,
February 2009
Initial release
Change
Revised information ISO International Standard
IEC European Standard
Environment and enclosure
Removal and insertion under power
Monitoring a test output status attribute ID
1734-IB8S Input voltage specification
Off-state input voltage specification
1734-IB8S and 1734-OB8S temperature ranges
Isolation voltage specification
North American Temperature Code
Radiated RF Immunity specification
CE certification
TÜV certification
New information European Hazardous Location Approval
Warning statement about European Zone 2 certification
North American Hazardous Location Approval
Setting the node address of a POINT Guard I/O module
Resetting POINT Guard I/O modules to out-of-box condition
Auto-addressing with a 1734-PDN adapter
IEC Temperature Code
c-UL-us certification
Ex certification
ODVA certification