Rohde & Schwarz CMW500 - Page 267

Command Reference - Base Software
R&S
®
CMW500
251User Manual 1173.9463.02 ─ 06
SENSe:BASE:IPSet:SMONitor:NAME?
Queries the name of all network nodes detected by the subnet monitor.
Return values:
<Names> Comma separated list of strings, one per network node
Example:
SENSe:BASE:IPSet:SMONitor:NAME?
Returns for example 'CMW50050-123456', 'PC1483'
Usage: Query only
Firmware/Software: V3.0.10
SENSe:
BASE:IPSet:SMONitor:TYPE?
Queries the type of all network nodes detected by the subnet monitor.
Return values:
<Types> Comma separated list of strings, one per network node
Example:
SENSe:BASE:IPSet:SMONitor:TYPE?
Returns for example 'CMW', 'PC'
Usage: Query only
Firmware/Software: V3.0.10
SENSe:BASE:IPSet:SMONitor:ID?
Queries the ID (third segment of IP address) of all network nodes detected by the subnet
monitor.
Return values:
<IDs> Comma separated list of values, one per network node
Range: 1 to 254
Example:
SENSe:BASE:IPSet:SMONitor:ID?
Returns for example 1, 77
Usage: Query only
Firmware/Software: V3.0.10
SENSe:BASE:IPSet:SMONitor:DESCription?
Queries the description of all network nodes detected by the subnet monitor.
Return values:
<Descriptions> Comma separated list of strings, one per network node
Example:
SENSe:BASE:IPSet:SMONitor:DESCription?
Returns for example 'CMW room 5', 'Logging PC 4'
Usage: Query only
Instrument-Control Commands