R&S PR100 User Manual
[SENSe]
. :DEModulation AM|FM| PULSe|CW|LSB|USB|IQ|ISB|A0|A1
Switchover of type of demodulation.
Parameters:
FM switch on FM demodulator
AM switch on AM demodulator
PULSe switch on pulse demodulator
CW, A1 switch on SSB demodulator with a beat frequency
USB switch on SSB demodulator upper sideband
LSB switch on SSB demodulator lower sideband
IQ, A0 switch on IQ demodulator
ISB switch on ISB demodulator
Remark:
For SSB demodulation (CW, LSB and USB,) the frequency stepwidth is set to
1 Hz.
Error:
If the bandwidth exceeds 9 kHz at CW, LSB and USB, an error -221,"Settings
conflict" is generated if one of the SSB operating modes is to be switched on.
Example:
DEMdulation AM
[SENSe]
. :DEModulation?
Query of demodulation type.
Parameters:
none
Result:
FM, AM, PULS, CW, USB, LSB, IQ, ISB
Example:
DEModulation? -> AM
To Next Page
Loading...
