Rohde & Schwarz PR100 - Page 178

R&S PR100 User Manual
[SENSe]
. :DEModulation
. . :BFO
. . . :FREQuency <numeric_value>|MINimum|MAXimum
Set the beat frequency.
Parameters:
<numeric_value> value of beat frequency
MINimum|MAXimum setting the lowest|highest beat frequency
Example:
SENSe:DEModulation:BFO:FREQuency 2.4 kHz
[SENSe]
. :DEModulation
. . :BFO
. . . :FREQuency? [MINimum|MAXimum]
Query of beat frequency.
Parameters:
none query of current beat frequency
MINimum|MAXimum query of lowest|highest beat frequency
Result:
beat frequency in Hz
Example:
SENSe:DEModulation:BFO:FREQuency? -> 2400