Rohde & Schwarz PR100 - Page 192

R&S PR100 User Manual
[SENSe]
. :FUNCtion
. . :CONCurrent <Boolean>
Determines whether several sensor functions can at the same time be
switched or not. If CONCurrent = OFF, the command SENSe:FUNCtion[:ON]
has the effect of a 1-out-of-n selection (one is switched on, the previously
activated is automatically switched off). If CONCurrent = ON, the command
SENSe:FUNCtion[:ON] switches the corresponding function on, while all the
other functions remain unchanged. If CONCurrent is switched from ON to
OFF, the function "VOLTage:AC" is switched on and all other functions are
switched off.
Parameters:
ON CONCurrent on
OFF CONCurrent off
*RST state:
ON
Example:
FUNCtion:CONCurrent ON
[SENSe]
. :FUNCtion
. . :CONCurrent?
Query of several sensor functions that, at the same time, can be switched or
not.
Parameters:
none
Result:
0 OFF
1 ON
Example:
FUNCtion:CONCurrent? -> 1