Rohde & Schwarz PR100 - Page 225

R&S PR100 User Manual
Result:
The FORMat:SREGister command determines the output format.
Example:
STATus:OPERation? -> #H8
STATus
. OPERation
. . :NTRansition <numeric_value>
Setting the negative transition filter of the OPERation status register.
Parameters:
<numeric_value> value of the NTRansition section
(e.g. 0..65535 or #H0..#HFFFF)
*RST state:
will not be changed by *RST
Example:
STATus:OPERation:NTRansition #H0
STATus
. OPERation
. . :NTRansition?
Query of the negative transition filter of the OPERation status register.
Parameters:
none
Remark:
Leading zero’s are not displayed.
Result:
The FORMat:SREGister command determines the output format.
Example:
STATus:OPERation:NTRansition? -> 0
STATus
. OPERation
. . :PTRansition <numeric_value>
Setting the positive transition filter of the OPERation status register.
Parameters:
<numeric_value> value of the PTRansition section
(e.g. 0..65535 or #H0..#HFFFF)