Rohde & Schwarz PR100 - Page 243

R&S PR100 User Manual
SYSTem
. :TIME <hours>, <minutes>, <seconds>
Sets the current time for the device
Parameters:
<hours> integer number in the range [0:23]
<minutes> integer number in the range [0:59]
<seconds> any number in the range [0:60]
The seconds are specified by a real number that is rounded
toward the resolution of the device’s internal clock accuracy. The
number 60 is allowed here, because rounding can yield a
number larger than 59.5.
Error:
In case the time is invalid, an execution error -200,"Execution error" is
generated.
*RST state:
The time is maintained after reset
Example:
SYSTem:TIME 15, 17, 01.876
SYSTem
. :TIME?
Query the current time of the device
Parameter:
none
Result:
<hours>, <minutes>, <seconds> (see SYST:TIME)
Example:
SYSTem:TIME? -> 15, 20, 31.546