TRACe|DATA
. [:DATA]? <trace_name>
Query of trace data. After the query, the trace is cleared, except for the
SSTART and SSTOP traces.
Parameters:
<trace_name> name of desired trace (MTRACE, ITRACE, IFPAN or
SSTART, SSTOP)
Error:
If the trace name is unknown, an error -141,"Invalid character data" will be
generated.
Result:
The output format is defined by the FORM:DATA command:
ASCii normal ASCII output
PACKed Block Data, see [Orion SCPI].
The possible data-types that can be output are listed below:
Data Type C Data-Type Description
“VOLTage:AC" signed short level in 1/10 dBVV
"FREQuency:OFFSet" signed long offset in Hz
“FSTRength" signed short field strength in 1/10 dBVV/m
Channel Number unsigned
short
channel number
Frequency unsigned
long long
frequency in Hz
What data and in what order belong to a trace, is specified for each trace
separately:
To Next Page
Loading...
