Roland Jupiter-50 - Registrations

Getting Acquainted with the JUPITER-50
23
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
Registrations
A Registration consists of these three Parts: Solo, Upper, and Percussion/Lower.
Stored within a Registration are the settings for the sound selected for each Part, as well as settings for the Solo Part and Percussion/Lower Part.
By switching Registrations, you can change all of these settings at once (except for the system parameters).
Solo Part
Tone
Registration
Percussion/Lower Part
Tone
Upper Part
Live Set
Reverb
Audio data ow Audio data ow
Harmony
Intelligence
Arpeggio
Only when the LOWER
TONE is selected
How Registrations are Organized
Registrations are managed in “banks” of four. In turn, these banks are managed as “sets” of four banks.
Since there are eight sets, 4 Registrations x 4 banks x 8 sets makes a total of 128 Registrations.
Set 1
Set 8
RegistrationBank
1
RegistrationBank
3
RegistrationBank
2
RegistrationBank
4