Roland Jupiter-50 - Live Sets; Parts

Getting Acquainted with the JUPITER-50
22
Live Sets
A Live Set consists of the Tones assigned to the four layers, settings
for four MFX units, and settings for one reverb unit.
Tone 1
Tone 2
Tone 3
Tone 4
Live Set
MFX 1
MFX 2
MFX 3
MFX 4
Reverb
Layer 1
Layer 2
Layer 3
Layer 4
You can select a Live Set as the sound for the Upper Part.
You can save 2,560 Live Sets you’ve edited, then call them up when
desired.
Live Set
0001–2560
MEMO
Edits you make to the parameters of a Live Set are relative
adjustments that increase or decrease the values of the Tones;
they do not directly modify the Tones themselves.
This means that even if the same tone is used in other Live Sets,
the other Live Sets will not be aected by your editing.
Parts
The JUPITER-50 has three parts; Solo, Upper,Percussion/Lower. You
can assign a Tone or Live Set to each Part and play it.
Solo
Upper
Percussion/Lower
You can play all Parts from the same keys, or use the Split function
(p. 44) to divide the keyboard and assign the sounds of dierent Parts
to their own zones.
The Registration screen shows the name of each Part’s
sound.
Not split
Percussion/Lower
Solo
Upper
Split
Solo
Upper
Percussion/Lower
For details on split, refer to “Split Performance” (p. 44).