Roland Jupiter-50 - REGISTRATION Screen; LIVE SET (UPPER) Screen

Navigating Between Screens
36
REGISTRATION Screen
1. In the Menu screen, choose “Edit” “Registration.”
Here you can view the volume of the Registration, and the volume
and pan settings of each Part.
MEMO
From the Top screen, you can also access the REGISTRATION
screen by holding down the [SHIFT] button and pressing the
[F1] (REG) button.
2. Press one of the [F1]–[F6] buttons to select the
Registration parameters that you want to edit.
3. Move the cursor to the parameter that you want to edit,
and edit the value.
MEMO
When a Registration has been edited, an “*” symbol will appear
at the left of the Registration number.
REGISTRATION COMMON
([F1] (COMMON) button)
Make overall settings for the Registration.
REGISTRATION CONTROL
([F2] (CONTROL) button)
Edit the controller settings.
REGISTRATION PERC/LOWER EDIT
([F3] (PRC/LWR) button)
Edit the settings of the Percussion/Lower Part.
REGISTRATION SOLO EDIT
([F4] (SOLO) button)
Edit the settings of the Solo Part.
REGISTRATION EXT PART
([F5] (EXT PART) button)
Edit Part settings for an external MIDI device.
REGISTRATION EFFECT
([F6] (EFFECT) button)
Edit the eect settings for the Registration.
Initializing a Registration
([SHIFT] + [F6] (INIT)button)
Here’s how to initialize the currently selected Registration.
LIVE SET (UPPER) Screen
1. In the Menu screen, choose “Edit” “Live Set (UPPER).”
View the name and volume of the Tones assigned to each layer of
the Live Set.
MEMO
From the Top screen, you can also access the LIVE SET (UPPER)
screen by holding down the [SHIFT] button and pressing the
[F5] (UPPER) button.
2. Press one of the [F1]–[F4], [F6] buttons to select the Live
Set parameters that you want to edit.
3. Move the cursor to the parameter that you want to edit,
and edit the value.
MEMO
When a Live Set has been edited, an “*” symbol will appear at the
left of the Live Set number.
LIVE SET COMMON
([F1] (COMMON) button)
Make overall settings for the Live Set.
LIVE SET LAYER
([F2] (LAYER) button)
Edit the settings of each layer.
LIVE SET EFFECT
([F3] (EFFECT) button)
Edit the eect settings for the Live Set.
LIVE SET MODIFY
([F4] (MODIFY) button)
Edit the tone of each layer.
LIVE SET TONE BLENDER
([F6] (BLENDER) button)
Simultaneously edit multiple parameters of the Live Set.
Copying a Layer
([SHIFT] + [F5] (COPY) button)
Here’s how to copy a layer to a dierent layer.
Initializing a Live Set
([SHIFT] + [F6] (INIT) button)
Here’s how to initialize the currently selected Live Set.
page 54
page 56
page 57
page 59
page 60
page 60
page 63
page 63