Settings and Convenient Functions
73
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
Viewing Sound Data You’ve Marked
You can use the Search function to quickly move to sound data that
you’ve marked.
1. In the screen where you’re marking sound data to export
(or import), hold down the [SHIFT] button and press the
[F1] (SEARCH
) or [F2] (SEARCH ) button.
You’ll be taken to the next marked sound data in the list.
Marking Multiple Items of Data
You can select multiple consecutive items of sound data, and mark
or unmark them.
1. In the screen where you’re selecting sound data, select
the lowest-numbered item of sound data that you want
to select.
2. Hold down the [SHIFT] button and use the [ ] [ ]
(cursor) buttons to select the highest-numbered item of
sound data that you want to select.
All sounds between the numbers you selected in steps 1 and 2 will
be selected.
The number of currently selected data items is shown in the upper
right of the screen.
3. Press the [F4] (MARK) button.
The marks will be added to (or cleared from) the sound data.
Deleting an Exported File
In the screen where you select the data le to be imported, you can
delete data les.
1. In the UTILITY MENU screen (p. 37), choose “Import” and
press the [ENTER] button.
The IMPORT screen will appear.
2. Select the data le that you want to delete.
NOTE
Data that you delete cannot be recovered.
Take care not to inadvertently delete important data.
3. Press the [F2] (DELETE) button.
The screen will ask “Are you sure?”
4. Press the [F5] (OK) button.
Renaming an Exported File
In the screen where you select the data le to be imported, you can
rename the data le.
1. In the UTILITY MENU screen (p. 37), choose “Import” and
press the [ENTER] button.
The IMPORT screen will appear.
2. Select the data le that you want to rename.
3. Press the [F1] (RENAME) button.
For details on assigning a name, refer to “Assigning a Name” (p. 34).
4. Press the [F6] (EXEC) button.
Moving a Registration
Here’s how to rearrange the order of the registrations.
1. In the UTILITY MENU screen (p. 37), choose “Reg Move/
Exchang” and press the [ENTER] button.
2. Use the cursor [ ] [ ] buttons to select a registration
set.
3. Use the value dial to select the registration that you want
to move.
4. Press the [F1] (Move) button to turn on the check box.
5. Use the value dial to select the destination for the move.
The numbers of the registrations between the source of the move
and the destination of the move will automatically be revised.
6. Press the [F6] (EXEC) button.
The screen will ask “Are you sure?”
7. To execute,press the [F5] (OK) button.
To Next Page
Loading...
