Roland Jupiter-50 - Settings and Convenient Functions; Basic Procedure for Utility Operations; Backing Up All Settings; Backing Up to a USB Flash Drive

70
Settings and Convenient Functions
Access the UTILITY MENU screen to select the desired setting or
function.
Basic Procedure for Utility
Operations
1. In the Menu screen (p. 35), choose “Utility” and press the
[ENTER] button.
The UTILITY MENU screen will appear.
2. Select the function that you want to execute, and press
the [ENTER] button.
Menu Explanation Page
Backup Saves user data to a USB ash drive. p. 70
Restore
Restores the JUPITER-50’s settings
from a USB ash drive.
p. 70
Format USB Mem
Format the USB ash drive that’s
connected to the USB MEMORY
connector.
p. 70
Factory Reset
Resets the JUPITER-50 to its factory
settings.
p. 79
Regist Set Exchange Exchanges Registration Sets. p. 71
Reg Move/Exchang
Changes the order of the registra-
tions, or exchanges the numbers of
two registrations.
p. 73
p. 74
Export
Writes JUPITER-50 sound data to a
USB ash drive.
p. 72
Import
Reads previously exported data from
a USB ash drive into the JUPITER-50.
p. 72
Initializing a USB Flash Drive
(Format)
This operation will initialize (format) a USB ash drive.
NOTE
When you execute this operation, all data saved on the USB
ash drive will be lost. If the USB ash drive contains important
data, back it up to your computer before initializing the USB
ash drive.
1. In the UTILITY MENU screen (p. 37), choose “Format USB
Mem” and press the [ENTER] button.
A message will ask “Are you sure?”
2. To initialize, press the [F5] (OK) button.
NOTE
Never turn o the power while an USB ash drive is being
formatted.
Backing Up All Settings
You can back up all of settings in the JUPITER-50 to a USB ash drive
(sold separately), or restore those settings into the JUPITER-50’s
memory.
MEMO
One set of backup data can be saved on a USB ash drive.
NOTE
• When you execute the backup operation, the backup data that
is currently saved on the USB ash drive will be overwritten. If
you want to keep the backup data that’s on the USB ash drive,
copy it to your computer as described in “Backing Up USB Flash
Drive Data to a Computer” (p. 71).
• Never insert or remove a USB ash drive while this unit’s power
is on. Doing so may corrupt the unit’s data or the data on the
USB ash drive.
• Carefully insert the USB ash drive all the way in-until it is rmly
in place.
• Use USB ash drive available from Roland. Proper operation
cannot be guaranteed if other USB device is used.
• Don’t connect anything other than a USB ash drive to the USB
MEMORY connector.
Backing Up to a USB Flash Drive
1. In the UTILITY MENU screen (p. 37), choose “Backup” and
press the [ENTER] button.
A message will ask “Are you sure?”
2. To execute, press the [F5] (OK) button.
NOTE
Never turn o the power while the backup operation is
occurring.
Restoring Backed-up Settings from a USB
Flash Drive
1. In the UTILITY MENU screen (p. 37), choose “Restore” and
press the [ENTER] button.
A message will ask “Are you sure?”
NOTE
When you execute the Restore operation, all settings currently
saved in the JUPITER-50 will be lost. If you want to keep the
current settings, back them up to a dierent USB ash drive.
2. To execute, press the [F5] (OK) button.
NOTE
Never turn o the power while the restore operation is
occurring.