Roland Jupiter-50 - Rear Panel Connections

Panel Descriptions
28
Rear Panel Connections
FOOT PEDAL jacks
HOLD jack
Here you can connect a pedal
switch (such as one from the DP
series; sold separately) and use it
as a Hold pedal (p. 52).
CTRL 1, CTRL 2 jacks
Here you can connect an expression pedal (EV-5; sold separately) or a pedal switch (such as one from the DP series; sold
separately) and use it to control various parameters or functions (p. 52).
* Use only the specied expression pedal (EV-5; sold separately). By connecting any other expression pedals, you risk
causing malfunction and/or damage to the unit.
* When operating an expression pedal, please take care not to pinch your ngers or toes between the moving part and
the main unit.
USB COMPUTER port
With a USB cable, you can connect the JUPITER-50
to your computer (p. 80).
NOTE
To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
MIDI connectors
For connecting MIDI device
(p. 81).
DISPLAY CONTRAST knob
Adjusts the contrast of the screen.