Roland Jupiter-50 - Changing the Split Point

Split Performance
45
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
How Split and Parts are Related
The following table shows how the split status determines the Parts that are assigned to the keyboard.
[PERC]
[LOWER TONE]
[SPLIT] [SOLO SPLIT]
Solo
Upper
Percussion/Lower
On
On On
On On
On On On
Changing the Split Point
You can change the point (Split Point or Solo Split Point) at which the keyboard is divided when Split or Solo Split are on.
The Split Point is the top key of the Percussion/Lower Part; you can specify it in the range of E1–F#7.
The Solo Split Point is the bottom key of the Solo Part; you can specify it in the range of F1–G7.
1. Hold down the [SPLIT] button or [SOLO SPLIT] button, and press the key that you want to specify as the split point.
Hold down the [SPLIT] button and press a key to specify the Split Point. Hold down the [SOLO SPLIT] button and press a key to specify the Solo Split
Point.