Basic Operation
33
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
Editing a Value
To edit the value highlighted by the cursor, use either of the following controllers.
• Value dial
• [DEC] [INC] buttons
Value dial
Turning the value dial toward the right will increase the value, and turning it toward the left will decrease the value.
If you hold down the [SHIFT] button while turning the value dial, the value will change in larger steps.
[DEC] [INC] buttons
Press the [INC] button to increase the value, or press the [DEC] button to decrease the value.
• If you hold down a button, the value will increase (or decrease) continuously.
• To rapidly increase the value, hold down the [INC] button and press the [DEC] button. Conversely, to
rapidly decrease the value, hold down the [DEC] button and press the [INC] button.
• If you hold down the [SHIFT] button and press the [INC] button or [DEC] button, the value will change in
larger steps.
[SHIFT] Button Operations
By holding down the [SHIFT] button and pressing another button, you can edit the settings of the button you pressed, or access a specic screen
(shortcut).
Shortcut Description Page
[SHIFT] + [ASSIGNABLE] Accesses the D-BEAM Assign setting screen. p. 54
[SHIFT] + [S1] (or [S2]) Accesses the Switch S1 Assign (or Switch S2 Assign) setting screen. p. 54
[SHIFT] + [HOLD]
[SHIFT] + ARPEGGIO [LOWER]
[SHIFT] + ARPEGGIO [UPPER]
Accesses the arpeggiator setting screen. p. 48
[SHIFT] + [HARMONY INTELLIGENCE] Accesses the Harmony Type setting screen. p. 50
[SHIFT] + [SPLIT] Accesses the Lower Split Point setting screen. p. 54
[SHIFT] + [SOLO SPLIT] Accesses the Solo Split Point setting screen. p. 54
[SHIFT] + UPPER [PIANO]
Accesses the LIVE SET TONE MODIFY screen for Layer 1–4 of the Live Set assigned to the Upper Part. p. 60
[SHIFT] + UPPER [E. PIANO/CLAV]
[SHIFT] + UPPER [COMBO ORGAN]
[SHIFT] + UPPER [CLASSIC ORGAN]
[SHIFT] + UPPER [SYNTH LEAD] Accesses the LIVE SET COMMON screen of the Upper Part. p. 57
[SHIFT] + UPPER [VIBES/MARIMBA] Accesses the LIVE SET LAYER screen of the Upper Part. p. 57
[SHIFT] + UPPER [OTHER] Accesses the LIVE SET EFFECTS screen of the Upper Part. p. 58
[SHIFT] + rotate the [C1] [C2] knobs Accesses the Knob 1 Assign (or Knob 2 Assign) screen. p. 54
The following are for the Top screen
[SHIFT] + [F1] Accesses the REGISTRATION screen. p. 54
[SHIFT] + [F2] Accesses the REGISTRATION PERC/LOWER EDIT screen. p. 54
[SHIFT] + [F3] Accesses the REGISTRATION SOLO EDIT screen. p. 54
[SHIFT] + [F4] Accesses the REGISTRATION EFFECT screen. p. 54
[SHIFT] + [F5] Accesses the LIVE SET(UPPER) screen. p. 57
[SHIFT] + [F6] Accesses the LIVE SET TONE BLENDER screen. p. 60
If you hold down the [SHIFT] button while editing a parameter’s value, the value will change in larger steps.
To Next Page
Loading...
