EasyManua.ls Logo

Roland Jupiter-50 - Audio Signal Flow; Using the Included USB Memory Protector

Roland Jupiter-50
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the USB Memory Song Player/Recorder
69
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
Audio Signal Flow
AUDIO IN
JUPITER-50 Sound Generator
(keyboard)
USB COMPUTER (from computer)
USB MEMORY SONG PLAYER
USB MEMORY
SONG RECORDER
Recording
Level
Recording
Mode
MAIN OUT/SUB OUT
USB COMPUTER
(to computer)
Song Level
Using the Included USB Memory Protector
You can use the included USB memory protector to prevent theft of the USB ash drive connected to the JUPITER-50.
NOTE
You must use the included screws.
You must use the included Allen wrench to tighten or remove the screws. Using a tool that does not match the screw heads will damage them.
Be careful not to over-tighten the screws. Doing so may damage the screw’s head, causing the wrench to rotate uselessly.
To tighten the screws, turn the Allen wrench clockwise. To loosen the screws, turn the Allen wrench counter-clockwise.
loosen tighten
Keep the removed screws out of the reach of small children to ensure they are not swallowed accidentally.
Never allow foreign objects (e.g., coins, wires) to enter the USB memory box.

Table of Contents

Other manuals for Roland Jupiter-50

Related product manuals