Roland Jupiter-50 - SYSTEM MENU Screen; UTILITY MENU Screen

Navigating Between Screens
37
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
SONG Screen
1. Press the [SONG] button.
Here you can operate the USB song player/recorder.
SONG LIST screen
SONG SETUP screen
VISUAL CONTROL Screen
1. Press the [VISUAL CONTROL] button.
The VISUAL CONTROL screen will appear when you press the
[VISUAL CONTROL] button. Here you can use the JUPITER-50 to
control video equipment that supports Visual Control.
SYSTEM MENU Screen
1. In the Menu screen, choose “System.”
The SYSTEM MENU screen will appear.
2. Select the item whose settings you want to change, and
press the [ENTER] button.
Setup
([F1] (SETUP) button)
Make overall settings for the entire JUPITER-50.
Live/Tone Buttons
([F2] (BUTTONS) button)
Make assignments for the part tone buttons.
Information
([F3] (INFO) button)
View the software version and the status of USB ash drive usage.
UTILITY MENU Screen
1. In the Menu screen, choose “Utility.”
The UTILITY MENU screen will appear.
Here you can back up or initialize user data.
2. Select the function that you want to execute, and press
the [ENTER] button.
Backup
Save user data to a USB ash drive.
Restore
Restore data from a USB ash drive back into the JUPITER-50.
Format USB Mem
Initialize a USB ash drive.
Factory Reset
Return the JUPITER-50 to its factory-set state.
Reg Set Exchange
Exchange the order of Registration Sets.
Reg Move/Exchang
Move
Change the order of the Registrations.
Exchange
Exchange the numbers of two Registrations.
Export
Write the JUPITER-50’s sound data to a USB ash drive.
Import
Load data previously exported to a USB ash drive back into the
JUPITER-50.
page 64
page 85
page 75
page 78
page 78
page 70
page 70
page 70
page 79
page 71
page 73
page 74
page 72
page 72