Roland Jupiter-50 - Button); Turning each Part On;Off and Adjusting Its Volume

Selecting the Sound for Each Part (Selecting Live Sets / Tones)
42
Sound buttons and sound categories
The Lower Tone can also be selected by holding down the [LOWER
TONE] button and pressing one of the Upper Part sound buttons.
The sound buttons correspond to the following sound categories.
Button Category Explanation
PERC Drums Drums and sound eects
LOWER TONE
+
PIANO
Ac. Piano Acoustic piano
E. Grand Piano Electric grand piano
LOWER TONE
+
E.PIANO/CLAV
E. Piano 1
Electric piano
E. Piano 2
Clav Clavi
LOWER TONE
+
COMBO ORGAN
E. Organ Electric organ
LOWER TONE
+
CLASSIC ORGAN
Pipe Organ Pipe Organ
LOWER TONE
+
BASS
Ac. Bass Acoustic bass
E. Bass Electric bass
Synth Bass Synth bass
LOWER TONE
+
PAD/CHOIR
Synth Pad/Strings Synth pads and synth strings
Synth Bellpad Synth bellpad
Vox/Choir Human voice and choir
LOWER TONE
+
STRINGS
Solo Strings Solo Strings
Ensemble Strings String ensembles
Orchestral Orchestral strings
LOWER TONE
+
SYNTH STRINGS
Synth Pad/Strings Synth pads and synth strings
LOWER TONE
+
BRASS/SAX
Solo Brass
Brass instruments such as
trumpet
Ensemble Brass Brass instrument ensembles
Sax Sax
LOWER TONE
+
SYNTH BRASS
Synth Brass Synth brass
LOWER TONE
+
WOOD WINDS
Wind Woodwinds
Flute Flute
LOWER TONE
+
GUITAR
Ac. Guitar Acoustic guitar
E. Guitar Electric guitar
Dist. Guitar Distortion guitar
LOWER TONE
+
SYNTH LEAD
Synth Lead Synth read
LOWER TONE
+
VIBES/MARIMBA
Mallet Vibraphone and marimba
LOWER TONE
+
OTHER
All Categories
All sounds
* The SuperNATURAL Acoustic
Tone 0028: TW Organ cannot
be selected.
Instantly Switching the Variation Sounds
(Alternate Button)
By pressing the [ALTERNATE] button, you can select a dierent
sound of the same type as that of the Part sound button.
The sound that’s selected will be the one that is specied in “LIVE
SET/TONE BUTTONS” (p. 78) (with the factory settings).
MEMO
If the [ALTERNATE] button is turned on, pressing a Part sound
button will display all categories.
For example, you can also assign sounds of other types (such as
bass) to the [PIANO] button.
Turning Each Part On/O and
Adjusting its Volume
When the Top screen or the REGISTRATION edit screen is displayed,
you can use the PART BALANCE area of the panel to turn on/o the
three parts and adjust their volume.
Use the [LEVEL] sliders
to adjust the volume of
each Part.
Turn each Part on/o.