Roland Jupiter-50 - Backing Up USB Flash Drive Data to a Computer; Restoring Backed-up Data from a Computer to a USB Flash Drive

Settings and Convenient Functions
71
Introduction Playing Sounds Editing Sounds
Other Convenient
Functions
Connecting Other
Equipment
Appendix
Quick Guide
Backing Up USB Flash Drive Data to a
Computer
Here’s how to back up the data from a USB ash drive to your
computer.
1. Turn o the JUPITER-50’s power.
2. Disconnect the USB ash drive from the JUPITER-50, and
connect it to your computer.
3. On your computer, open the USB ash drive.
4. Copy (drag and drop) the entire “ROLAND” folder from the
USB ash drive into a folder on your computer.
NOTE
You must copy the entire “ROLAND” folder.
The data will not be backed up correctly if you copy only part of
the les in the “ROLAND” folder.
5. When the copy is completed, unmount (eject) the USB
ash drive from your computer, and then disconnect it
from the computer.
Windows 7/ Windows Vista / Windows XP users:
In My Computer (or Computer), right-click the “removable disk”
icon and choose “Eject.”
Mac OS X users:
Drag the USB ash drive icon into the Trash.
Restoring Backed-up Data from a
Computer to a USB Flash Drive
1. Connect the USB ash drive to your computer, and open
the USB ash drive.
2. Copy (drag and drop) the entire backed-up “ROLAND”
folder from your computer into the USB ash drive.
NOTE
• When you copy the backed-up data to your USB ash drive, the
data that was previously on the USB ash drive will be lost.
• You must copy the entire “ROLAND” folder. The system will not
operate correctly if you copy only some of the les from the
“ROLAND” folder.
3. Disconnect the USB ash drive from your computer as
described in step 5 of “Backing Up USB Flash Drive Data to
a Computer” (p. 71).
Exchanging Registration Sets
Here’s how to exchange entire Registration Sets.
1. In the UTILITY MENU screen (p. 37), choose “Regist Set
Exchange” and press the [ENTER] button.
The REGISTRATION SET EXCHANGE screen will appear.
2. Specify the numbers of the Registration Sets that you
want to exchange.
3. Press the [F6] (EXEC) button.
A message will ask “Are you sure?”
4. Press the [F5] (OK) button.
When the Registration Sets have been exchanged, the message
“Exchange Completed!” will appear.
NOTE
Never turn o the power while a Registration Set is being
exchanged.