Roland Jupiter-50 - Saving a Live Set

Editing a Live Set
62
Saving a Live Set
Edits you make to the Live Set are temporary; they will be lost if you
turn o the power or select another Live Set. If you want to keep
the edited Live Set, you must save it to user memory.
NOTE
When you save, the data previously existing in the save
destination will be overwritten.
1. With the LIVE SET (UPPER) screen (p. 36) displayed, press the
[WRITE] button.
The LIVE SET WRITE screen will appear.
2. Move the cursor to Write Destination and use the value
dial or the [DEC] [INC] buttons to change the write
destination.
3. Press the [F6] (WRITE) button.
A message will ask “Are you sure?”
4. To save the Live Set, press the [F5] (OK) button.
The screen will indicate “Completed!”
The Live Set has been saved to the save-destination Live Set
number you specied.
NOTE
Never turn o the power while data is being saved.
Cancelling the Save of a Live Set
You can cancel the save operation by doing one of the following.
• Press the [EXIT] button
• Press the [WRITE] button
Naming a Live Set
If you want to rename the Live Set, press the [F5] (RENAME)
button of step 2.
The LIVE SET NAME screen will appear.
For details on assigning a name, refer to “Assigning a Name”
(p. 34).