Roland V-Synth GT - Modify (When Phrase Model Is Flute)

130
Editing a Tone (Pro Edit)
Com MOD COSM1/2 TVAOSC1/2 AP Syn EffectsCom MOD COSM1/2 TVAOSC1/2 AP Syn Effects
fig.06b-66-ps.eps_50
Modify (when Phrase Model is “Flute”)
Parameter
Value Description
Attack Time
-100– +100
Adjusts the attack of the sound. Positive (+) values will make the at-
tack slower, and negative (-) values will make the attack faster.
Release Time -100– +100
Adjusts the length of the release. Positive (+) values will lengthen the
release, and negative (-) values will shorten it.
Slur Nz Level (Slur Noise Level) -100– +100
Adjusts the volume of the slur noise (the transitional sound made
when changing the pitch while continuing to produce sound). Posi-
tive (+) values will make this volume louder, and negative (-) values
will lessen it.
Breath Nz Level
(Breath Noise Level)
-100– +100
Adjusts the volume of the breath noise. Positive (+) values will in-
crease the volume, and negative (-) values will decrease it.
Natural Feel -100– +100
Adjusts the amount of variation in the sound. Positive (+) values will
produce more variation, and negative (-) values will produce less.
Vibrato Dly Time
(Vibrato Delay Time)
-100– +100
Adjusts the time from the beginning of the note until vibrato begins
to be applied. Positive (+) values will lengthen the time until vibrato
begins, and negative (-) values will shorten the time.
Vibrato Depth -100– +100
Adjusts the depth of vibrato when the dynamics are at the minimum.
Positive (+) values will produce deeper vibrato, and negative (-) val-
ues will produce less vibrato.
Vibrato Rate -100– +100 Adjusts the vibrato rate. Positive (+) values will make the vibrato
faster, and negative (-) values will make it slower.
V-Synth-GT_e.book 130 ページ ２００７年４月９日 月曜日 午後１時４６分