160
Editing a Tone (SOUND SHAPER II)
Here you can use the [E1]–[E8] knobs to edit the most important COSM parameters.
fig.06c-xx-ps.eps_50
1.
Use the COSM 1/2 switches to turn COSM 1/2 on/off.
2.
Touch the screen to select the COSM 1/2 types.
You can also change the type by using the VALUE dial or [INC/+] [DEC/-].
3.
Use the [E1]–[E8] knobs to edit the COSM 1/2 parameters.
For details on each parameter, refer to
“COSM1/COSM2”
(p. 117) or “COSM_EffectsList(E).pdf” in the “EFFECTS
LIST” folder on the included CD-ROM.
COSM
The most suitable parameters for COSM will be assigned.
COSM1 Switch COSM2 Switch
COSM1 Type COSM2 Type
V-Synth-GT_e.book 160 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
