Roland V-Synth GT User Manual

154
Vocal Designer
Compressor: Reduces high-level sounds and boosts low-level sounds, thus improving the overall volume balance of
the sound.
fig.06d-14-ps.eps
Comp
Parameter
Value Description
Mic/Compressor Switch
OFF, ON
Turns the compressor on/off.
CP Ratio (Compressor Ratio) 1:1.0–1:16,
1:INF
Specifies the compression ratio.
CP Threshold
(Compressor Threshold)
-36–0dB
Specifies the level at which compression will begin.
CP Attack (Compressor Attack) 0–100
Specifies the time from when the input exceeds the Threshold until the volume
begins to be compressed.
CP Release (Compressor Release) 0–100
Specifies the time it is to take after the input falls below the Threshold before
compression ceases.
CP Gain (Compressor Gain) 0–24 dB
Specifies the output gain.
V-Synth-GT_e.book 154 ページ ２００７年４月９日 月曜日 午後１時４６分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English