Roland V-Synth GT - V-LINK Settings

208
System Mode (Settings Common to All Modes)
fig.08-20.eps_50
V-LINK Settings
Tx
Parameter
Value Description
V-LINK MIDI Channel
1–16
Specifies the channel used to transmit MIDI messages for V-LINK control.
V-LINK Audio Sw
(V-LINK Audio Switch)
OFF, ON
Specifies whether sound from the externally connected video device will be
played (ON) or not played (OFF).
Keyboard Output Fade Sw
(V-LINK Keyboard Output Fade
Switch)
OFF, ON
Specifies whether the video output from the video device will be stopped
(ON) or will not be stopped (OFF) when you are not holding down a key.
Patch Palette Local Sw
(V-LINK Patch Palette Local
Switch)
OFF, ON Specify whether you will press PATCH PALETTE [1]–[8] in V-LINK mode to
switch patches (ON) or not (OFF).
V-Synth-GT_e.book 208 ページ ２００７年４月９日 月曜日 午後１時４６分