Roland V-Synth GT - Convert Project (Convert a Project)

219
Utility Mode
This operation will convert (import) a V-Synth Version 2.0 or V-Synth XT project for use with your V-Synth GT.
1.
Using your computer, create a folder named “XT” on your USB memory device.
2.
Copy the V-Synth Version 2.0 or V-Synth XT project to the “XT” folder on the USB memory device, and connect it
to the V-Synth GT’s USB MEMORY connector.
3.
Press [UTILITY] to access the Utility Menu screen.
4.
Touch <Project>.
The Project Menu screen appears.
fig.09-01-ps.eps_50
5.
Touch <Convert Project>.
The Convert Project screen appears.
fig.09-07-ps.eps_50
6.
Touch the V-Synth Version 2.0 or V-Synth XT project in USB memory to select it.
Convert Project (Convert a Project)
V-Synth-GT_e.book 219 ページ ２００７年４月９日 月曜日 午後１時４６分