Roland V-Synth GT - Tone Init (Initializing the Tone Settings)

84
Patch Mode (Editing a Tone)
“Initialize” means to return the settings of the currently selected tone to a standard set of values.
The Initialize operation will affect only the currently selected tone; the tones that are stored in internal memory and
temporary area will not be affected. If you wish to restore all of the V-Synth GT’s settings to their factory values,
perform a Factory Reset (p. 235).
1.
Select the tone that you wish to initialize.
2.
Touch <MENU> in the upper right of the screen.
A pulldown menu appears.
fig.06a-01.eps_50
3.
In the pulldown menu, touch <Tone Init>.
A window like the following appears.
fig.06a-07.eps_50
4.
Touch <OK>.
The initialization will be carried out.
Tone Init (Initializing the Tone Settings)
V-Synth-GT_e.book 84 ページ ２００７年４月９日 月曜日 午後１時４６分