Roland V-Synth GT User Manual

231
Utility Mode
Perform this adjustment if the touch panel no longer responds as you expect.
1.
In the Utility Menu screen, touch <Calibration>.
The Calibration screen appears.
fig.09-30-ps.eps_50
2.
Touch <Touch Screen>.
The Touch Screen Calibration screen appears.
fig.09-31-ps.eps_50
3.
Touch the center of “+” symbol indicated by the square symbol in the screen, in the following order: left → top →
right → bottom.
When you have touched all four points, the screen will close, and the sensitivity of the touch screen will be
calibrated.
Calibration (Adjusting the Controllers)
Adjusting the Positional Accuracy of the Touch Panel
V-Synth-GT_e.book 231 ページ ２００７年４月９日 月曜日 午後１時４６分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English