Roland V-Synth GT - OSC1;OSC2 (Oscillator 1;2)

95
Editing a Tone (Pro Edit)
Com MOD COSM1/2 TVA EffectsOSC1/2 AP Syn
The “ oscillator ” is the section that specifies the basic wave that the V-Synth GT will play, and modifies this wave in
various ways. Each tone can contain up to two oscillators.
fig.06b-20-j.eps
OSC1/OSC2 (Oscillator 1/2)
Parameter
Value Description
Oscillator Switch
OFF, ON
Switches the oscillator on/off.
OSC Type
Parameter
Value Description
Oscillator Type
Analog OSC
Analog Oscillator
PCM OSC PCM Oscillator
External In External Input Oscillator
A signal applied to the rear panel’s INPUT jacks can be used as an oscillator.
This means that you can use the keyboard to play the signal that’s being input
from an external source. (You’ll hear the sound only while you are playing
the keyboard.)
You can’t use an audio signal that’s received via digital input (DIGITAL IN)
(p. 200).
Oscillator Switch Oscillator Type
V-Synth-GT_e.book 95 ページ ２００７年４月９日 月曜日 午後１時４６分