Roland V-Synth GT - Save Project (Saving a Project)

217
Utility Mode
This operation saves the project from the temporary area into internal memory or USB memory.
1.
Press [UTILITY] to access the Utility Menu screen.
2.
Touch <Project>.
The Project Menu screen appears.
fig.09-01-ps.eps_50
3.
Touch <Save Project>.
The Save Project screen appears.
fig.09-04-ps.eps_50
4.
To save to internal memory, touch <Int>. To save to USB memory, touch <USB>. Then select the save-destination
project.
If you want to save the data as a new project, touch <New Project>. The Project Name window will appear. Assign
a name to the new project.
Save Project (Saving a Project)
V-Synth-GT_e.book 217 ページ ２００７年４月９日 月曜日 午後１時４６分