Roland V-Synth GT - Format (Initializing Internal Memory or USB Memory)

234
Utility Mode
You can initialize (format) internal memory or USB memory to erase all data.
1.
Press [UTILITY] to access the Utility Menu screen.
2. Touch <Format>.
The Format screen appears.
fig.09-50-ps.eps_50
3.
If you want to format the internal memory, touch <Internal Memory>.
If you want to format a USB memory, touch <USB Memory>.
4.
When you format a USB memory, the Volume Name window will appear, allowing you to assign a new volume
name.
5.
Touch <OK>.
A Warning window like the following appears.
fig.09-51-ps.eps_50
If you want to cancel the procedure at this point, touch <EXIT>.
6. Touch <OK> to execute the operation.
Format (Initializing Internal Memory or USB Memory)
V-Synth-GT_e.book 234 ページ ２００７年４月９日 月曜日 午後１時４６分