Roland V-Synth GT - Sample Name (Naming a Sample)

168
Sample Mode
Assign a new name to the sample. You can assign a name consisting of up to twelve characters.
1.
Access the Sample Top screen, and select the sample that you want to name (p. 178).
2.
Touch <MENU> in the upper right of the screen.
A pulldown menu appears.
fig.07-03_50
3.
In the pulldown menu, touch <Sample Name>.
The Sample Name window appears.
fig.04-04_50
4. Touch the on-screen alphabetic or numeric keys to enter the new name in the text box.
The on-screen keys have the following functions.
5. When you have finished inputting, touch <OK> to finalize the sample name.
If you want to return to the original unedited name, touch <EXIT>.
Sample Name (Naming a Sample)
< << >< >> >
Move the cursor in the text box to the desired input location.
<shift> Turn this on when you want to input uppercase letters or symbols.
<clear all> Erases all characters in the text box.
<back space> Deletes the character that precedes the cursor location.
<delete> Deletes the character at the cursor location.
V-Synth-GT_e.book 168 ページ ２００７年４月９日 月曜日 午後１時４６分