Roland V-Synth GT - Effects

162
Editing a Tone (SOUND SHAPER II)
Here you can use the [E1]–[E8] knobs to edit the most important parameters of each effect.
fig.06c-20-ps.eps_50
1.
Use the effect switches to turn each effect on/off.
2.
Select the desired type for each effect.
3.
Use the [E1]–[E8] knobs to edit the parameters of each effect.
You can also edit the parameters by using the VALUE dial or [INC/+] [DEC/-].
For details on the parameters of each effect, refer to “COSM_EffectsList(E).pdf” in the “EFFECTS LIST” folder on the
included CD-ROM.
Effects
TONE-FX/CHORUS/REVERB Parameter
(The most suitable parameters are assigned.)
TONE-FX/CHORUS/
REVERB Type
TONE-FX/CHORUS/REVERB Switch
V-Synth-GT_e.book 162 ページ ２００７年４月９日 月曜日 午後１時４６分