Roland V-Synth GT - E1-E8 Knobs (E1-E8 Knob Settings)

228
Utility Mode
1.
Press [UTILITY] to access the Utility Menu screen.
2.
Touch <E1–E8 knobs>.
The E1–E8 Knob Settings screen appears.
3.
Specify the parameters you wish to assign to the E1–E8 knobs.
fig.09-37-ps.eps_50
E1–E8 Knobs (E1–E8 knob Settings)
Parameter Value Description
Init Settings Sw Initializes the settings of the E1–E8 knobs.
E1–E8 Assign Specify the parameters assigned to the E1–E8 knobs.
V-Synth-GT_e.book 228 ページ ２００７年４月９日 月曜日 午後１時４６分