Roland V-Synth GT User Manual

81
Patch Mode (Editing a Tone)
Changes you make to sound settings are temporary, and will be lost if you turn off the power or select another sound.
If you want to keep the modified sound, you must save it in the internal (internal memory).
When you modify the settings of a tone, the Patch Play screen will indicate “*.” Once you save the patch into internal
memory, the “*” indication goes away.
When you perform the save procedure, the data that previously occupied the save destination will be lost. However,
the factory setting data can be recovered by performing the Factory Reset (p. 235).
1.
Make sure that the tone you wish to save is selected.
2.
Touch <MENU> in the upper right of the screen.
A pulldown menu appears.
fig.06a-01.eps_50
3.
In the pulldown menu, touch <Tone Write>.
The Tone Write window appears.
fig.06a-02.eps_50
4.
Turn the VALUE dial to specify the save-destination tone.
• When you touch <Search>, the Tone Write Number List window will appear, allowing you to select the save-
destination tone from the list.
5.
Touch <OK> to execute the Save operation.
Tone Menu
Tone Write (Saving Tones)
V-Synth-GT_e.book 81 ページ ２００７年４月９日 月曜日 午後１時４６分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English