Roland V-Synth GT - Time Trip Pad

209
System Mode (Settings Common to All Modes)
fig.08-21.eps_50
Time Trip Pad
Parameter
Value Description
Time Trip Pad Local Sw
(V-LINK Time Trip Pad Local
Switch)
OFF, ON
Specifies whether the Time Trip pad and the internal sound generator will be
disconnected in V-LINK mode (OFF) or not disconnected (ON).
X Assign-XY (V-LINK X Assign-XY)
Specify the V-LINK function that
will be controlled when you oper-
ate the Time Trip pad in the X (hor-
izontal) direction in XY mode.
Y Assign-XY (V-LINK Y Assign-XY)
Specify the V-LINK function that
will be controlled when you oper-
ate the Time Trip pad in the Y (ver-
tical) direction in XY mode.
OFF The time trip pad will not be used.
PLAYBACK-
SPEED
Playback speed
DISSOLVE-
TIME
Dissolve time (time over which the image switches)
AUDIO LEVEL Volume during audio playback
COLOR-CB Color Cb (color-difference signal)
COLOR-CR Color Cr (color-difference signal)
BRIGHTNESS Brightness
VFX1 Visual effects 1
VFX2 Visual effects 2
VFX3 Visual effects 3
VFX4 Visual effects 4
OUTPUT-FADE Output fade
T-BAR T bar
Assign-Time Trip
(V-LINK Assign-Time Trip)
Specify the V-LINK function that
will be controlled when you oper-
ate the Time Trip pad in Time Trip
mode.
OFF The time trip pad will not be used.
TIME-TRIP Time trip
V-Synth-GT_e.book 209 ページ ２００７年４月９日 月曜日 午後１時４６分