194
System Mode (Settings Common to All Modes)
Changes you make to the System function settings are only temporary—they will be discarded as soon as the power
is turned off. If you want to keep any changes you’ve made in the system settings, you must save them in internal
memory.
When you perform the save procedure, the data that previously occupied the save destination will be lost. However,
the factory setting data can be recovered by performing the Initialization procedure.
1.
After you have edited the settings of the System function, touch <MENU>, located in the upper right of the screen.
A pulldown menu appears.
fig.08-25-ps.eps_50
2.
In the pulldown menu, touch <System Write>.
A window like the following will appear.
fig.08-26.eps_50
3.
Touch <OK>.
The system settings will be saved, and you’ll be returned to the Patch Edit screen.
System Menu
System Write (Saving the System Settings)
V-Synth-GT_e.book 194 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
Need help?
General
