193
System Mode (Settings Common to All Modes)
Settings that affect the entire operating environment of the V-Synth GT, such as tuning and MIDI message reception,
are referred to as system functions. This section explains how to make settings for the System functions and describes
the functions of the different System parameters.
1.
Press [SYSTEM].
fig.08-01-ps.eps_50
2.
The parameters are organized into several editing groups. Touch one of the buttons at the bottom of the screen to
select the edit group containing the parameters you want to set.
3.
Touch one of the tabs in the left of the screen to select the desired editing screen.
4.
Touch the various screens in which settings are made to edit the parameters.
Move the cursor to the value box of the parameter you want to edit, and perform any of the following actions.
• Turn the VALUE dial
• Press [INC/+] or [DEC/-]
• Drag your fingertip on the touch panel
5.
Changes you make to the System function settings are only temporary—they will be discarded as soon as the
power is turned off. If you want to keep any changes you’ve made in the system settings, you must save them in
internal memory (p. 194).
How to Make the System Function Settings
Tabs
Editing Groups
V-Synth-GT_e.book 193 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
Need help?
General
