Roland V-Synth GT User Manual

221
Utility Mode
By connecting the V-Synth GT to your computer via a USB cable, you can save (back up) projects and other files such
as individual patches, waves, and data from internal memory to the hard disk of your computer.
Using software on your computer, you can also edit wave data you’ve created on the V-Synth GT. Conversely, wave
data created on your computer can be used by the V-Synth GT.
Never turn off the power or disconnect or reconnect the USB cable while using the USB Storage function to transfer
data.
As appropriate for the computer you’re using, please read “Windows Users” (p. 221) or “Mac Users” (p. 223).
Connecting the V-Synth GT to Your Computer
1.
Make sure that the power of the V-Synth GT is turned off.
2. Start up your computer.
3.
Connect the V-Synth GT and your computer using a USB cable.
fig.09-10_j.eps
4.
Turn on the power of V-Synth GT.
USB Storage (Exchanging Files with Your Computer)
Windows Users
USB
Connector
USB Cable
Computer
V-Synth GT
V-Synth-GT_e.book 221 ページ ２００７年４月９日 月曜日 午後１時４６分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English